Can't tell if student followed directions or not. Lot's of room for improvement. Why did you hand this in in this condition.
70 pts
Student followed directions, but should have sought help more, There are a lot of changes that need to be taken care of to make this stage ready.
80 pts
Student followed directions. With a little more effort this project would be stage ready. Items needing adjustments could have been attended to before handing the project in for grading.
90 pts
All directions are followed, Student worked to the very best of his/her ability. Very few if any changes need to be done to the finished project. Can be considered stage ready.
100 pts
(N/A)
1. Make sure the client has the proper shoes on prior to fitting.<BR> 2. Fit the garment on client by pinning the inseam and outseam of one leg.
1. Measure the inseam to the bottom of where the hem is pin to determine length of the pant. <BR> 2. Mark length and add seam allowance and mark. <BR> 3. This is done for both sides of the pant. <BR> 4. Make sure both are even.
1. Cutting on along the bottom of the measure seam allowance. <BR> 2. Cutting is straight and percise. Double check that both legs are even.
1. Even stitches and <BR> proper tension<BR> 2. Match thread to garment
1. Hem is stitch at 1/8" from edge.
1. Stitching of hem is even through out.<BR> 2. Backstitching is at the inseam. <BR> 3. Leg of pant measures the same on both side.
1. New hem is press.
1. The grament looks great and fits well on the body.