Skip to main content
iRubric: Metal Working Occupation rubric

iRubric: Metal Working Occupation rubric

find rubric

edit   print   share   Copy to my rubrics   Bookmark   test run   assess...   delete   Do more...
Metal Working Occupation 
Metal Working Occupation
To be used in technical manufacting and machining, to assess how well students are able to apply theory knowledge to accomplish an assigned task.
Rubric Code: GX544B8
By markdows
Ready to use
Public Rubric
Subject: Vocational  
Type: Project  
Grade Levels: 9-12

Powered by iRubric Machine Shop Skills
  A

4 pts

B

3 pts

C

2 pts

D

1 pts

F

0 pts

Grade N/A

0 pts

Part is free from burrs.
15 %

Sharp edges & burrs have been removed.
A

15 pts
Part is completly free from sharp edges.
B

11.25 Pts
Part has only 1 sharp edge.
C

7.5 Pts
Part has only 2-3 sharp edges.
D

3.75 Pts
Part has 4-5 sharp edges.
F

0 Points
Part has more than 5 sharp edges.
Grade N/A
Demonstration of program knowledge.
10 %

A

10 pts
Student knows and is able to identify and explain necessary theories for completion of the project.
B

7.5 Pts
Student is able to identify and explain necessary theories for completion of the project with some assistance.
C

5 Pts
Student is unable to identify or explain concepts without major prompting.
D

2.5 Pts
Student is not able to both identify and explain major theories.
F

0 points
Student is unable to either identify or explain any related theories to the project.
Grade N/A
Level of Needed Assistance
5 %

A

5 Pts
Student was able to complete the task without assistance.
B

3.75
Student was able to complete the task with little assistance.
C

2.5 Pts
Student was able to complete the task with moderate assistance.
D

1.25 Pts
Student was unable to complete task without major assistance.
F

0 Points
Student was unable to complete task with assistance.
Grade N/A
Student Preparedness
5 %

A

5 Pts
Student had/gathered all materials and was completely ready to go to work.
B

3.75 Pts
Student had/gathered most materials and went to work.
C

2.5 Pts
Student had/gathered most materials, however, they needed excess time to do so.
D

1.25 Pts
Student did not have/gather some of the needed materials to perform work.
F

0 Points
Student did not have/gather the needed materials and was unable to perform work.
Grade N/A
Time Management
5 %

A

5 Pts
Routinely used time well throughout the project to get the job done on time.
B

3.75 Pts
Used time fairly well throughout the project.
C

2.5 Pts
Procrastinated somewhat but did get the job done on time.
D

1.25Pts
Was unable to adequately meet timeline due to inablility.
F

0 Points
Did not meet timeline due to procrastination or wasting time.
Grade N/A
Part Dimensions.
20 %

A

20 Pts
Part was machined 100% within print tolerances.
B

15 Pts
Part only had 1 or 2 dimensions or features out of tolerance.
C

10 Pts
Part had 3-5 dimesions or features out of tolerance.
D

5 Pts
Part had 6-8 dimensions or features out of tolerance.
F

0 Points
More than 9 dimensions or features were out of tolerance.
Grade N/A
Application of Safety Practices
20 %

A

20 Points
Student followed all safety rules.
B

15 Points
Student followed most safety rules, may have forgotten one on occasion.
C

10 Points
Student attempted to follow safety rules but failed to meet several.
D

5 Points
Student failed to follow a significant number of safety rules often.
F

0 Points
Student made no effort to follow safety rules.
Grade N/A
Care of Machine, Tools & Cleanup
20 %

A

20 points
Student took great care of the precision tools & and equipment that he or she used. All tools where retuned to tool room & the machine and work area was cleaned properly.
B

15 Points
Student took some care with the precision tools & equipment. Work area & machine where particaly cleaned. Some tools not returned to tool room.
C

10 Points
Little care was taken with tools & machine.
Few tools where returned to the tool room. Machine and work area not week cleaned.
D

5 Points
Student failed to take care of tools and or did not clean the
machine.
F

0 Points
Student was careless with tools & or machine resulting in broken tools or equipment. Student did not return tools to the tool room and aslo did not clean machine and assinged work area.
Grade N/A



Keywords:
  • Project Grading Rubric


Types:

Discuss this rubric




Do more with this rubric:
Preview

Preview

Preview this rubric.
Edit

Edit

Modify this rubric.
Copy

Copy

Make a copy of this rubric and begin editing the copy.

Print

Print

Show a printable version of this rubric.
Categorize

Categorize

Add this rubric to multiple categories.
Bookmark

Bookmark

Bookmark this rubric for future reference.
Assess
Test run

Test run

Test this rubric or perform an ad-hoc assessment.
Grade

Grade

Build a gradebook to assess students.
Collaborate

Collaborate

Apply this rubric to any object and invite others to assess.
Share
Publish

Publish

Link, embed, and showcase your rubrics on your website.
Email

Email

Email this rubric to a friend.
Discuss

Discuss

Discuss this rubric with other members.
 

Do more with rubrics than ever imagined possible.

Only with iRubrictm.


Copyright © 2024 Reazon Systems, Inc.  All rights reserved.
n98