iRubric: Clothing Construction Ruberic rubric

layout, pinning, and cutting of the pattern were very difficult. cut lines are very jaggedy and will make construction difficult. markings of dots and notches needs much work.

Some struggles existed for this step, although most were done well enough that construction from this point will still be successful. The inside of the garment may indicate these initial struggles.

The initial steps of preparing the fabric, pinning on pattern, cutting out project and marking were so well done that this project was set for success.

Cut edges are often not even. Stitching varies greatly throughout the garment. Backstitiching may or may not have been done. Stitching is crooked. Pressing is poor if at all. Corrections need to be made for this garment to look nice on

Seams are fairly accurate with few variations in the stitiching lines. backstitching, seam allowance width and seam finishes, and pressing are done, but there is ample room for imporvement

Seams are accurately sewn with edges even, backstitched at ends, using correct stitch length and seam allowance. Seam finishes are used unless not appropriate. Seams correctly pressed