- Username
- Password
forgot?

iRubric: Weld Bead Assessment - SMAW E6013 rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...
Weld Bead Assessment - SMAW E6013 Weld Bead Assessment - SMAW E6013 Rubric Code: L23B6C6 By Michaelstanley Ready to use Public Rubric Subject: Vocational Type: Project Grade Levels: 9-12

Enter rubric title SMAW Weld Beads
	Unacceptable 2 pts	Needs Improvement 5 pts	Acceptable 7 pts	Very Good 10 pts
Safety Practices	Unacceptable No welding helmet worn. No safety glasses worn. Student will not be allowed to continue the assignment.	Needs Improvement Two or more of the following safety practices violated: No welding gloves worn. Incorrect shoes worn. Incorrect clothing worn. Hot metal carried in gloved hand(s). Did not use proper eye protection.	Acceptable One or more of the following safety practices violated: No welding gloves worn. Incorrect shoes or clothing worn. Hot metal carried in gloved hands. Did not use proper eye protection.	Very Good All of the following safety practices were followed: Proper welding gloves worn. Proper shoes worn. Proper clothing worn. Pliers, etc. used to carry hot metal. Proper eye protection was used.
Bead Width	Unacceptable Bead unsuccessfully made.	Needs Improvement Bead narrower or wider than width of two electrodes used.	Acceptable The majority of the bead is equal to the width of two electrodes used.	Very Good Bead width equals the width of two electrodes used.
Bead Shape	Unacceptable Bead unsuccessfully made.	Needs Improvement Bead does not form the acceptable shape - has one of following problems. Too flat Too high and does not blend into the base metal at the weld toes.	Acceptable Proper bead shape is not consistent for the entire length of the bead.	Very Good Bead has an acceptable shape for the entire weld.
Weld Defects	Unacceptable Bead unsuccessfully made.	Needs Improvement More than two of the following defects are present: Excess spatter is present. Bead is not uniform. Weld ripples are long and pointed.	Acceptable 1 of the following defects are present: Excess spatter is present. Bead is not uniform. Weld ripples are long and pointed.	Very Good No weld defects are present.
Start / Finish of Weld	Unacceptable Bead unsuccessfully made.	Needs Improvement Start of weld (width) is not the same as the finish. Crater not filled in.	Acceptable Start of weld (width) is not the same as the finish. Crater not filled in.	Very Good Start of weld same width as finish. Crater filled in.