iRubric: Wall Framing - Group Build Assignment rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...

Wall Framing - Group Build Assignment

Wall Framing - Basic. Students will be able to frame a wood built wall according to plans. Keywords: PPE, dimension, discrepancy, flush, alignment, shiner, stud, plate, component.

Rubric Code: KX5B493

By cooleycc

Ready to use

Public Rubric

Subject: Vocational

Type: Project

Grade Levels: 9-12

Wall Framing 100 %
	Falls Far Below 0 pts	Approaches From (1-30) 30 pts	Meets From (31-40) 40 pts	Exceeds From (41-50) 50 pts	Total (N/A)
Safety & Tool Use 10 %	Falls Far Below Safety glasses and other PPE come off even once during project. Work area is cluttered and tools are not used properly or put back properly.	Approaches All necessary PPE is worn at all times. Work area is kept free of major obstacles, but scraps and unneeded tools are left out. Tools are used improperly more than once.	Meets All necessary PPE is worn at all times. Work area is usually kept clutter free; scraps and unneeded tools are put away fairly quickly. Tools are always used properly and placed in their proper area.	Exceeds All necessary PPE is worn at all times. Work area is kept clutter free; scraps and unneeded tools are put away immediately. Tools are always used properly and placed in their proper area.	Total
Level & Squareness of Frame 30 %	Falls Far Below A discrepancy of more than 1/2" exists between diagonals and more then a half bubble out of level	Approaches A discrepancy of 1/2" or less exists between diagonals and less then a half bubble out of level	Meets A discrepancy of 1/4" or less exists between diagonals and less then a 1/4 bubble out of level	Exceeds A discrepancy of 1/8" or less exists between diagonals and the frame is level.	Total
Dimensions 30 %	Falls Far Below One or more of the dimensions is off by MORE THAN 1/2". Length, width, height, etc.	Approaches One or more of the dimensions is off by 1/2" or less. Length, width, height, etc.	Meets One or more of the dimensions is off by 1/4" or less. Length, width, height, etc.	Exceeds All dimensions of the frame are 1/8" or less. Length, width, height, etc.	Total
Structure and Appearance 20 %	Falls Far Below Has excessive gaps, damages, raised nails, and lacks alignment. The frame is not	Approaches Has three or more components are out of flush.	Meets No more than two components are out of flush.	Exceeds All components are flush. There are no gaps between studs and plates larger than 1/8".	Total
Components 10 %	Falls Far Below Any of the component requirements are not evident or are out of position by 1/2" or more.	Approaches Studs are placed within 1/2" of specified spacing.	Meets Studs are placed within 1/4" of specified spacing.	Exceeds Studs are placed within 1/8" of specified spacing.	Total

Keywords:

PPE, dimension, discrepancy, flush, alignment, shiner, stud, plate, component

Subjects:

Vocational

Types:

Project

Discuss this rubric