iRubric: Sheet metal Storage Tray box rubric

The technical drawing was done properly and neatly. All required parts, dimensions, and labels are present and accurate

The technical drawing had some imperfections, OR was not very neat, OR was missing some parts, dimensions, and labels, OR there were parts of the drawing that were inaccurate

The technical drawing had some imperfections, OR was not very neat, OR was missing some parts, dimensions, and labels, OR there were parts of the drawing that were inaccurate.
2 OR MORE OF THE ABOVE

The technical drawing had some imperfections, OR was not very neat, OR was missing some parts, dimensions, and labels, OR there were parts of the drawing that were inaccurate.
3 OR MORE OF THE ABOVE

Measurements are accurate. Plans followed.

Minor measurement errors. Plans followed but some steps skipped or done incorrectly.

A few measurement errors. Plans not followed closely. Many steps done incorrectly.

No attention to measurements. Very little accuracy in following plans.

The bends were all made at the appropriate angles. The hems were the correct size and shape. The hems and bends were made according to the layout.

The bends were made mostly according to the layout. Less than two hems are not the correct size and/or shape.

The bends were sufficient enough to hold the project together. The hems were not the correct size and/or shapes but still work.

Most of the bends and hems were not satisfactory.