iRubric: Bow Rubric

(draft) edit print share Copy to my rubrics Bookmark test run assess... delete Do more...

Bow Rubric

Used for grading recuves

Rubric Code: DB6B8

By tgoeks

Draft

Public Rubric

Subject: Vocational

Type: Project

Grade Levels: 9-12, Undergraduate

Recurve Project
	Poor 10 pts	Fair 20 pts	Good 30 pts
Rough in Riser	Poor incorrect species selected for lamintions, Pieces are not cut to correct lengh or width, Much time was wasted on tablesaw or planer	Fair Correct species selected for lamintions, Pieces are not cut to correct lengh, but width is correct Some time was wasted on tablesaw or planer	Good Correct species selected for lamintions, Pieces are cut to correct lengh and width Little to no time was wasted on tablesaw or planer
Limbs	Poor Limbs were picked based on little to no research or advise, Limbs were not rough sawn and brought down to size using the planer, Growth rings and grain were ignored	Fair Limbs were picked based some research or advise, Limbs were rough sawn and brought down to size using the planer, Growth rings and grain were ignored	Good Limbs were picked based much research and advise, Limbs were rough sawn and brought down to size using the planer, Growth rings and grain were not ignored
Limbs Creaped	Poor Limbs were not creaped	Fair	Good Limbs were Creaped
Riser Clamp	Poor Poor judgement on amount of glue was used. Used clamps with no backing, not enough clamps were used, Clamped with excessive pressure. No straight edge or jig was used to clamp riser	Fair Poor judgement on amount of glue was used. Used clamps with backing, enough clamps were used, Clamped with excessive pressure. No straight edge or jig was used to clamp riser	Good Good judgement on amount of glue was used. Used clamps with backing, enough clamps were used, Clamped with adequate pressure. A straight edge or jig was used to clamp riser
Riser cut out	Poor Riser was not cut with bandsaw, Riser was not sanded and faded correctly, Top and bottom of riser unequal	Fair Riser was cut with bandsaw, Riser was not sanded and faded correctly, Top and bottom of riser equal	Good Riser was cut with bandsaw, Riser was sanded and faded correctly, Top and bottom of riser equal
Wood Limb / Riser Adhesion	Poor Limbs were not crept and attached to riser with front first, back was not faded, correctly, back limb was attached with front limb,	Fair Limbs were crept and attached to riser with front first, back was not faded, correctly, back limb was attached in correct sequence,	Good Limbs were crept and attached to riser with front first, back was faded, correctly, back limb was attached in correct sequence,
Glass Limb Adhesion	Poor Glass was not pre-sanded, To much glue was used, Wrong glue was used, Limbs have bad bond	Fair	Good Glass was pre-sanded, Adequate amount of glue was used, Correct glue was used, Limbs have good bond

Keywords:

Subjects:

Vocational

Types:

Project

Discuss this rubric