iRubric: Plasma Torch Set up. rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...

Plasma Torch Set up.

Set up and safely light and adjust oxyacetylene flame.

Rubric Code: CX437X9

By KPruitt

Ready to use

Public Rubric

Subject: Vocational

Type: Assignment

Grade Levels: 9-12

Plasma Torch Cutting
	Poor 2 pts	Fair 6 pts	Good 10 pts
Safety Attire. Wears proper PPE during	Poor Two or more of the following safety procedures violated: - No Shade eye protection. - No welding gloves. - No protective clothing. - Incorrect shoes.	Fair Only one of the following safety procedures violated: - No Shade eye protection. - No welding gloves. - No protective clothing. - Incorrect shoes.	Good None of the following safety procedures violated: - No Shade eye protection. - No welding gloves. - No protective clothing. - Incorrect shoes.
Plasma Machine Set-Up. Confirms Air Pressure is set correctly.	Poor Did not check to ensure that the air was set at the correct psi.	Fair	Good Checked to ensure that the air was set at the correct psi.
Plasma Machine Set-Up. Confirms amperage is set correctly.	Poor Did not check to ensure that the amperage was set at the correctly for material thickness.	Fair	Good Checked to ensure that the amperage was set correctly for material thickness.
Machine Shut-Down Shuts down machine safely.	Poor Followed incorrect shut-down procedures resulting in un-safe conditions. Did not disconnect air or/and electricity. Did not "roll up" leads.	Fair Followed incorrect shut-down procedures resulting in safe conditions. Did not disconnect air or electricity. Did not "roll up" leads.	Good Followed correct shut-down procedures resulting in safe conditions. Disconnected air and electricity. Did "roll up" leads.