iRubric: Sheet Metal Tray rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...

Sheet Metal Tray

Sheet metal tool box

Evaluation of bottom and side layout, cutting , bending and welding.

Rubric Code: C66X39

By nwhsautobody

Ready to use

Public Rubric

Subject: Vocational

Type: Project

Grade Levels: (none)

Sheet metal tray
	Advanced 4 pts	Proficient 3 pts	Basic 2 pts	Below Basic 1 pts
Layout	Advanced The layout of the project was accurately done with little imperfection.	Proficient The layout of the project was mostly accurate, showing some imperfections that did not have an impact on the final project.	Basic The layout of the project was below average, showing imperfections that had a significant impact on the final project.	Below Basic The layout of the project was poor.
Cutting	Advanced The cutting of the project was accurately done with little imperfection.	Proficient The cutting of the project was mostly accurate, showing some imperfections that did not have an impact on the final project..	Basic The cutting of the project was below average, showing imperfections that had a significant impact on the final project.	Below Basic The layout of the project was poor.
Hems / Bends	Advanced The bends were made mostly according to the layout. Less than two hems are not the correct size and/or shape.	Proficient The bends were sufficient enough to hold the project together. The hems were not the correct size and/or shapes but still work.	Basic Most of the bends and hems were not satisfactory.	Below Basic The bends were unsatisfactory and 1 or more of the hems where not made accurately.
Spot Welding	Advanced The appropriate number of spot welds were made, but were not well spaced. One of the welds were over or under heated.	Proficient The appropriate number of spot welds were made, but were not well spaced. Several of the welds were over or under heated.	Basic The appropriate number of spot welds were not made or positioned correctly. Several of the welds were over or under heated.	Below Basic The welds do not hold the project together properly.