iRubric: CAD II Orthographic Pre Assessment rubric

(draft) edit print share Copy to my rubrics Bookmark test run assess... delete Do more...

CAD II Orthographic Pre Assessment

Engineering Drawing Part #___

CAD Engineering drawing

Rubric Code: AB2W46

By meparr

Draft

Public Rubric

Subject: Engineering

Type: Project

Grade Levels: 9-12

Design Projects
	95% - 100% 10 pts	85% - 94% 8 pts	60% - 84% 6 pts	59% or less 4 pts	Comments (N/A)
Clarity of Design	10 The drawing fully describes the intent of the designer. Drawing is clear and reflects what the product is.	8 Drawing is clear and reflects what product is.	6 Drawing is clear but not reflective of what the product is.	4 Drawing is not clear and is not obvious about what the product is.	N/A
Proper Line types and Layers	10 Able to understand, set and use all the line types appropriately. All line types are drawn correctly. All lines are on the correct layer.	8 Able to set and use the line types correctly. Most line types on the drawing are used correctly Most lines are on the correct layer.	6 Able to understand and set the line type, but unable to use it correctly. Some lines on the drawing are used correctly. Some lines are on the correct layer.	4 No rules were followed. Did not use correct line type or weight. Did not use correct layers.	N/A
Graphically Accurate	10 All geometry in the drawing is continuous. Drawing views provided are sufficient, correct and appropriate. Drawing is drawn full scale in model space.	8 Most of the geometry in the drawing is continuous. Drawing views provided are sufficient, correct appropriate. Drawing is not drawn full scale in model space	6 Some of the geometry in the drawing is continuous. 50% of drawing views provided are sufficient, correct or appropriate. Drawing is not drawn full scale in model space	4 59% and lower of the geometry in the drawing is continuous. The drawing views provided are not sufficient, correct or appropriate. Drawing is not drawn full scale in model space	N/A
Viewport and Scale	10 Viewport set to appropriate scale. Dimension scale matches viewport scale.	8 Viewport is set to appropriate scale. Dimension scale does not match viewport scale.	6 Viewport is set to a scale, but not most appropriate scale.	4 Viewport is not set to an architectural or engineering scale.	N/A
Title Block and Paper Space Layout	10 Drawing has an excellent appearance. Space is used to display the final drawing in a professional manner. The title block is fully edited and notated.	8 Accurate print area is selected. Space is used to display the final drawing in a professional manner. The title block is only mostly completed.	6 Space is used properly to display drawing. The title block is only partially completed.	4 Incorrect print area selected. Information about the drawing and the designer is not provided.	N/A
Dimensions and Notes	10 All important dimensions are shown on the drawing. Dimensions are correct. Not duplicate dimensions	8 Most of dimensions are done correctly.	6 Some of dimensions are done correctly.	4 Improper and/or unnecessary dimensioning.	N/A
Orthographic projection	10 All views are projected correctly.	8 2 Views are projected	6 1 view is projected incorrectly.	4 All views are projected, but are incorrect.	N/A
Follow Directions -Final Print and	10 Printed to correct printer using correct paper size, and used correct pen Assignments- Saved in correct drive	8 Printed to correct printer, did not select correct paper size or did not use correct pen Assignments - Saved in correct drive	6 Did not print to correct printer, wrong paper size and wrong pen assignments - did not save into correct drive	4 Failed to print and follow directions	N/A

Subjects:

Engineering

Types:

Discuss this rubric