- Username
- Password
forgot?

iRubric: Welding Assessment rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...
Welding Assessment Welding Assessment Students will use shielded metal arc welding (SMAW) techniques to weld in flat position using a 7018 or 6011 or 6013 electrode. Rubric Code: A44A36 By myjordan Ready to use Public Rubric Subject: Vocational Type: Project Grade Levels: (none)

Plate 7018, 6010, 6013
	Poor 1 pts	Fair 2 pts	Good 5 pts	excellent 10 pts
Safety Equipment	Poor Two or more of the following safety procedures violated: - No welding helmet - No welding gloves - No leathers - Incorrect shoes	Fair Only one of the following safety procedures violated: - No welding helmet - No welding gloves - No leathers - Incorrect shoes	Good None of the following safety procedures violated: - No welding helmet - No welding gloves - No leathers - Incorrect shoes	excellent all saftey criteria and proper shop skills were followed
Metal Inspection	Poor Did not prepare weld metal. Did not tack metal. Did not show to instructor before welding. Metal not cut to correct dimensions.	Fair Missed one or two of the criteria.	Good Properly prepared weld metal. Tacked weld metal in proper position. Showed to instructor before welding. Dimensions correct.	excellent all saftey criteria and proper shop skills were followed
Bead Width	Poor Less than the thickness of the material	Fair 1/16" to 1/8" wide	Good 1/8" to 3/16" wide	excellent all saftey criteria outlined and proper shop skills were followed
Bead Height	Poor Less than 3/32" and inconsistent	Fair 3/32" height and varied consistence	Good 1/16" high and smooth bead	excellent all saftey criteria outlined and proper shop skills were followed
Penetration	Poor Penetration of less than 1/4 the base	Fair Penetration of less than 1/2 the base	Good Penetration of less than 3/4 of the base	excellent all saftey criteria outlined and proper shop skills were followed
Travel Speed	Poor Too slow or too fast	Fair Inconsistent speed	Good Consistent, correct speed	excellent all saftey criteria outlined and proper shop skills were followed
Defects	Poor More than 2 of the following defects: undercut overlap excessive spatter not uniform burn-through pores/pits	Fair 1 or 2 of the following defects: undercut overlap excessive spatter not uniform burn-through pores/pits	Good No defects	excellent all saftey criteria outlined and proper shop skills were followed