iRubric: Welding rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...
Welding Welding SMAW Welding Rubric Code: A25444 By cowboyrebel04 Ready to use Public Rubric Subject: Vocational Type: Class note Grade Levels: (none)

SMAW 6010
	Poor 1 pts	Fair 2 pts	Good 3 pts	Excellent 5 pts
Safety	Poor One of the four criteria met.	Fair Two of the four criteria met.	Good Three of the four criteria met.	Excellent Safety glasses are worn at all times in the shop and in the welding booth. Gloves are worn while welding and handling metal. Pliers were used in moving metal from booth to table.
slag on weld	Poor Weld not cleaned	Fair Little removed	Good Some remaining	Excellent No Slag
Bead Width	Poor Varies within 3/16"	Fair Varies within 1/8"	Good Consistant and within 1/16"	Excellent Consistant and within 1/32"
Bead Height	Poor Varies within 1/8	Fair Varies within 1/16"	Good Consistant and within 1/32"	Excellent Consistant and within 1/64"
Weldment	Poor One of the four criteria met.	Fair Two of the four criteria met.	Good Three of the four criteria met.	Excellent Weld starts on edge and finishes on edge. Welds are straight. Welds are touching. Two four inch welds per rod.
Apperance	Poor Uneven	Fair 3 - 4 sections varied ripples	Good 2 sections or less and even within sections	Excellent even ripples and smooth