iRubric: Install Compression Style F-Type Connectors on RG-6 cable rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...

Install Compression Style F-Type Connectors on RG-6 cable

Install Crimp Style F-Type Connectors on RG-6 Coaxial Cable

Chapter 16 - Video, Voice and Data Wiring installation Lab 16.2 - Install Compression Style F-Type Connectors on RG-6 Coaxial Cable

Rubric Code: WX2722B

By mrsmdean

Ready to use

Private Rubric

Subject: Vocational

Type: Assessment

Grade Levels: 9-12

Install Compression F-Type Conn.
	Unacceptable 0 pts	Fair 2 pts	Good 4 pts
Safety Rules	Unacceptable Student didn't observe any applicable safety rules.	Fair Student observed some applicable safety rules.	Good Student observed all applicable safety rules.
Measure and cut coaxial cable	Unacceptable Student didn't measure or cut the coaxial cable correctly.	Fair The student cut a length of coaxial cable, but it wasn't 6 foot long.	Good Student measured and cut the proper length of coaxial cable.
Measured and marked	Unacceptable Student didn't measure or mark 3/4 inch from the end of the cable.	Fair Student didn't measure correctly. Student didn't mark correctly.	Good Student measured and marked 3/4 inch from the end of the cable.
Outside sheathing removed	Unacceptable The student didn't use the correct tool (coaxial cable stripper) and the student didn't removed 1/4 inch of the outside sheathing of the cable.	Fair Student didn't use the correct tool (coaxial cable stripper). Student didn't removed 1/4 inch of the outside sheathing of the cable.	Good Student used the correct tool (coaxial cable stripper), and removed 1/4 inch of the outside sheathing of the cable.
White dilectric insulation removed	Unacceptable The student didn't use the correct tool (coaxial cable stripper) and the student didn't removed 1/4 inch of the dielectric insulation from the center conductor.	Fair The student didn't use the correct tool (coaxial cable stripper). Student didn't removed 1/4 inch of the dielectric insulation from the center conductor.	Good Student used the correct tool (coaxial cable stripper) and the student removed 1/4 inch of the dielectric insulation from the center conductor.
Braid folded back	Unacceptable The student didn't fold the copper braid back over the outer sheathing.	Fair The student partially folded the copper braid back over the outer sheathing.	Good The student folded the copper braid back over the outer sheathing.
Installed connector	Unacceptable The student didn't install the RG-6 F-Type connector correctly.	Fair The student installed the RG-6 F-Type connector, but the white dielectic insulation wasn't even with the hole on the inside of the connector.	Good The student installed the RG-6 F-Type connector correctly by pushing the connector onto the end of the cable until the white dielectric insulation is even with the hole on the inside of the connector.
Compressed sleeve correctly.	Unacceptable Student didn't used the proper tool and didn't compress the sleeve.	Fair Student didn't used the proper tool The student didn't compress the sleeve.	Good Student used the proper tool to compress the sleeve.
Test the patch cord	Unacceptable The student didn't test the patch cord. The patch cord failed.	Fair The student didn't test the patch cord or the patch cord failed when tested.	Good The student tested the patch cord and it passed.
Clean up and tools returned	Unacceptable Student didn't clean up area or return tools to their proper location.	Fair Student didn't clean up area. Student didn't return tools to their proper location.	Good Student cleaned up area and returned tools to their proper location.

Subjects:

Vocational

Types:

Assessment

Discuss this rubric