iRubric: GTAW Joint Weld Assessment 1F - 4F Position rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...

GTAW Joint Weld Assessment 1F - 4F Position

Used to evaluate students performance welding beads in all position

Rubric Code: UX88XB6

By LSC_WLDG_CRED

Ready to use

Public Rubric

Subject: Vocational

Type: Assessment

Grade Levels: (none)

GTAW Bead Building In Flat Position
	Poor 13 pts	Fair 15 pts	Good 20 pts	Excellent 25 pts
Penetration	Poor filler metal is on top of base metal, or burn through an bottom of base metal. Hole(s) in base metal	Fair shows evidence of no penetration in some of the weld.	Good shows evidence of good penetration in most of the weld.	Excellent Weld bead has sufficient buildup, and noburn trough
Width of Bead	Poor Width of weld bead varies 1/4	Fair Width of bead weld varies 3/16	Good Width of weld bead varies 1/8	Excellent Width of weld bead varies in size between 1/8 and 1/4th
Height of bead	Poor Not consistant and very uneven.	Fair 2 - 3 sections of weld bead too high or too low.	Good 1 section or of weld bead too high or too low.	Excellent weld bead is half the thickness of the metal or more and does not varies more than 1/64
Apperance	Poor ripples uneven and rough.	Fair Most of the weld is rough and has uneven ripples.	Good Some of the weld is rough and has uneven ripples.	Excellent Weld is smooth and ripples are evenly spaced.