iRubric: Install RJ-45 Jacks on the ends of a Four-Pair Cat 5e Cable rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...

Install RJ-45 Jacks on the ends of a Four-Pair Cat 5e Cable

Install Compression Style F-Type Connectors on RG-6 cable

Chapter 16 - Video, Voice and Data Wiring installation Lab 16.3 - Install RJ-45 Jacks on the ends of a Four-Pair Cat 5e Cable

Rubric Code: SX27232

By mrsmdean

Ready to use

Private Rubric

Subject: Vocational

Type: Assessment

Grade Levels: 9-12

Install RJ-45 Jacks on Cat 5e Cable
	Unacceptable 0 pts	Fair 2 pts	Good 4 pts
Safety Rules	Unacceptable Student didn't observe any applicable safety rules.	Fair Student observed some applicable safety rules.	Good Student observed all applicable safety rules.
Jacket removed	Unacceptable The student didn't use the correct tool and the student didn't removed 1/2 inch of the jacket from the cable.	Fair The student didn't use the correct tool. The student didn't removed 1/2 inch of the jacket from the cable.	Good The student used the correct tool and the student removed 1/2 inch of the jacket from the cable.
Correct wiring scheme used	Unacceptable The student didn't know the wiring schemes.	Fair The student didn't pick the correct wiring scheme.	Good Student used the correct wiring scheme.
Route the conductors	Unacceptable The student didn't route the wires correctly.	Fair The student partially routed the conductors correctly.	Good The student routed the wires correctly.
Jacket in proper position	Unacceptable The student didn't place the jacket in the jack housing.	Fair The student placed the jacket but it didn't touch the rear of the jack housing.	Good The student placed the jacket so it touches the rear of the jack housing.
Seat each conductor	Unacceptable Student didn't seat each conductor into the proper IDC slot and the twists weren't within 1/2 inch of the IDC slot.	Fair Student didn't seat each conductor into the proper IDC slot. Student didn't make sure the twists were within 1/2 inch of the IDC slot.	Good Student seated each conductor into the proper IDC slot and the twists were within 1/2 inch of the IDC slot.
Seat each conductor into IDC slot	Unacceptable Student didn't use the proper tool to seat each conductor into the proper IDC slot.	Fair Student used the proper tool, but didn't seat each conductor into the proper IDC slot.	Good Student used the proper tool to seat each conductor into the proper IDC slot.
Cap placed	Unacceptable Student didn't place the cap over the terminated wires and didn't pressed it into place.	Fair Student placed the cap over the terminated wires but didn't pressed it into place.	Good Student placed the cap over the terminated wires and pressed it into place.
Test the patch cord	Unacceptable The student didn't test the patch cord and the patch cord failed.	Fair The student didn't test the patch cord The patch cord failed when tested.	Good The student tested the patch cord and it passed.
Clean up and tools returned	Unacceptable Student didn't clean up area or return tools to their proper location.	Fair Student didn't clean up area. Student didn't return tools to their proper location.	Good Student cleaned up area and returned tools to their proper location.

Subjects:

Vocational

Types:

Assessment

Discuss this rubric