iRubric: ADID-471 Intro to BIM for Int. Design: Assignment-B rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...

ADID-471 Intro to BIM for Int. Design: Assignment-B

ADID-471 Intro to BIM for Int. Design: Assignment-A

Revit Architecture 2009: Tenant space - add floor finishes, ceilings, and crown/base mouldings.

Rubric Code: N23X9B

By hadendsmith

Ready to use

Public Rubric

Subject: Computers

Type: Assignment

Grade Levels: Undergraduate

0.5-point items
	No Credit 0 pts	Fair 0.125 pts	Good 0.25 pts	Very Good 0.375 pts	Perfect 0.5 pts	NOT USED (N/A)	NOT USED (N/A)
Rm - Back Storage 4 7/8" PTN wall type; Door: 36x84	No Credit	Fair	Good	Very Good	Perfect	NOT USED	NOT USED
Rm - Kitchenette min 5' front/back; width 6' to 8'	No Credit	Fair	Good	Very Good	Perfect	NOT USED	NOT USED
Rm - Office To fit desk, chair, file & guest chair(s); door min 32x84	No Credit	Fair	Good	Very Good	Perfect	NOT USED	NOT USED
Rm - Vestibule 3'-8 (from before); add door 36x84	No Credit	Fair	Good	Very Good	Perfect	NOT USED	NOT USED
Create Floor Type 1 Named; At least 1 layer; Material used	No Credit	Fair	Good	Very Good	Perfect	NOT USED	NOT USED
Create Floor Type 2 Named; At least 2 layers; Materials used	No Credit	Fair	Good	Very Good	Perfect	NOT USED	NOT USED
Floor Finish - Main Space Sketch to fin face of walls; Flr Type used; el offset aligns w/ slab; geometry joined	No Credit	Fair	Good	Very Good	Perfect	NOT USED	NOT USED
Floor Finish - Restroom Sketch to fin face of walls; Flr Type used; el offset aligns w/ slab; geometry joined	No Credit	Fair	Good	Very Good	Perfect	NOT USED	NOT USED
Floor Finish - Office Sketch to fin face of walls; Flr Type used; el offset aligns w/ slab; geometry joined	No Credit	Fair	Good	Very Good	Perfect	NOT USED	NOT USED
Floor Finish - Kitchenette Sketch to fin face of walls; Flr Type used; el offset aligns w/ slab; geometry joined	No Credit	Fair	Good	Very Good	Perfect	NOT USED	NOT USED
Public Space Clg - Walls Walls att to und. separating exposed clg area; 1 bulkhead	No Credit	Fair	Good	Very Good	Perfect	NOT USED	NOT USED
1-point items
	No Credit 0 pts	Poor 0.17 pts	Fair 0.33 pts	Good 0.5 pts	Very Good 0.8 pts	Excellent 0.83 pts	Perfect 1 pts
Borrow Lite Wndw in Office Wnd Type: 18"x6'+ Sill Ht: 5'-6"+ Plan Region: - Sketch - View Range cut 6'	No Credit	Poor	Fair	Good	Very Good	Excellent	Perfect
Clgs. in Office Main Clg - Type 2x2 or 2x4 - ht 8'6,9'0 or 9'4 Lt Cove Soffit - Sketch - w/ hole - Ht: 7'8 or 8'0	No Credit	Poor	Fair	Good	Very Good	Excellent	Perfect
Crown Mould in office Wall sweep Type w/ wd. profile Ht - tight to lt cove All walls, corners clean & mitered	No Credit	Poor	Fair	Good	Very Good	Excellent	Perfect
Wall Base in Office Flr Slab Edge - type Wd profile used Applied to correct edges Corners mitered Btm of base is @ top of Flr Finish	No Credit	Poor	Fair	Good	Very Good	Excellent	Perfect
0.25-point items
	No Credit 0 pts	Partial Credit 0.125 pts	Perfect 0.25 pts	NOT USED (N/A)	NOT USED (N/A)	NOT USED (N/A)	NOT USED (N/A)
Back hall/vest, storage No flr finish or base, and either no ceiling or ACT clg.	No Credit	Partial Credit	Perfect	NOT USED	NOT USED	NOT USED	NOT USED
Ceiling - Restrm & Kitchen GWB clg walls at least to clg height, Clg + Soffit in Kitchenette	No Credit	Partial Credit	Perfect	NOT USED	NOT USED	NOT USED	NOT USED
0.5-point Extra Credit
	No Credit 0 pts	Partial Extra Credit 0.25 pts	Full Extra Credit 0.5 pts	NOT USED (N/A)	NOT USED (N/A)	NOT USED (N/A)	NOT USED (N/A)
Extra Floor Types More than 2 Floor Finish Types created and used	No Credit	Partial Extra Credit	Full Extra Credit	NOT USED	NOT USED	NOT USED	NOT USED
Office Light Cove Soffit walls around light cove constructed	No Credit	Partial Extra Credit	Full Extra Credit	NOT USED	NOT USED	NOT USED	NOT USED

Keywords:

Walls Dimensions

Subjects:

Computers

Types:

Assignment

Discuss this rubric