iRubric: Install RJ-45 Modular Plugs on the Ends of Category 5e UTP rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...

Install RJ-45 Modular Plugs on the Ends of Category 5e UTP

Install RJ-45 Jacks on the ends of a Four-Pair Cat 5e Cable

Chapter 16 - Video, Voice and Data Wiring installation Lab 16.4 - Install RJ-45 Modular Plugs on the Ends of Category 5e UTP

Rubric Code: MX27238

By mrsmdean

Ready to use

Private Rubric

Subject: Vocational

Type: Assessment

Grade Levels: 9-12

Install RJ-45 Jacks on Cat 5e Cable
	Unacceptable 0 pts	Fair 2 pts	Good 4 pts
Safety Rules	Unacceptable Student didn't observe any applicable safety rules.	Fair Student observed some applicable safety rules.	Good Student observed all applicable safety rules.
Measured and Cut Cable	Unacceptable Student didn't use the proper tool, didn't measure and cut the cable the proper length.	Fair Student didn't use the proper tool. Student didn't measure the cable correctly. Student didn't cut the cable the proper length.	Good Student used the proper tool, measured and cut the cable the proper length.
Jacket removed	Unacceptable The student didn't use the correct tool and the student didn't removed 3/4 inch of the jacket from the cable.	Fair The student didn't use the correct tool. The student didn't removed 3/4 inch of the jacket from the cable.	Good The student used the correct tool and the student removed 3/4 inch of the jacket from the cable.
Correct wiring scheme used	Unacceptable The student didn't know the wiring schemes.	Fair The student didn't pick the correct wiring scheme.	Good Student used the correct wiring scheme.
Jacket in proper position	Unacceptable The student didn't place the jacket in the jack housing.	Fair The student placed the jacket but it didn't touch the rear of the jack housing.	Good The student placed the jacket so it touches the rear of the jack housing.
Wires in proper order	Unacceptable The student didn't put the wires in the proper order.	Fair The student got some of the wires in the proper order.	Good The student got all of the wires in the proper order.
Pins Crimped	Unacceptable The student didn't use the proper tool and didn't crimp the pins.	Fair The student used the proper tool, but didn't crimp the pins.	Good The student used the proper tool and crimped the pins.
Test the patch cord	Unacceptable The student didn't test the patch cord and the patch cord failed.	Fair The student didn't test the patch cord The patch cord failed when tested.	Good The student tested the patch cord and it passed.
Clean up and tools returned	Unacceptable Student didn't clean up area or return tools to their proper location.	Fair Student didn't clean up area. Student didn't return tools to their proper location.	Good Student cleaned up area and returned tools to their proper location.