- Username
- Password
forgot?

iRubric: Oxy-Fuel Torch Set-up rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...
Oxy-Fuel Torch Set-up Oxy-Fuel Torch Set-up Rubric Code: M2444W5 By Michaelstanley Ready to use Public Rubric Subject: Vocational Type: Presentation Grade Levels: 9-12

Oxy-Fuel Set-Up
	Below Basic 1 pts	Basic 2 pts	Proficient 3 pts	Advanced 4 pts
Personal Safety Equipment	Below Basic Student does not use required personal safety equipment when preparing to set oxy-fuel equipment.	Basic Student uses most personal safety equipment but is missing safety glasses or is not wearing appropriate welding/cutting gloves, jacket, or cutting goggles/faceshield.	Proficient Student wears correctly all required safety equipment for this exercise.	Advanced Student wears correctly all required safety equipment for this exercise.
Torch Set-Up	Below Basic Student does not check cutting equipment to insure hoses/ torches and torch valves are in correct positions. Students incorrectly open valves on cylinders or incorrectly sets pressures on operating gauges. Student does not light torch correctly or cannot properly adjust to a nuetral flame.	Basic Student checks cutting equipment but misses more than one step or adjusts valves/gauges incorrectly. Student lights torch correctly but cannot adjust to a neutral flame.	Proficient Student checks cutting equipment but misses a step or adjusts valves/gauges incorrectly. Student lights torch correctly but cannot adjust to a neutral flame.	Advanced Student correctly checks equipment and insures valves and gauges are adjusted properly. Student lights torch and adjusts for neutral flame properly.
Torch Shut-Down	Below Basic Student incorrectly shuts down cutting equipment out of sequence or leaves a valve open.	Basic Student shuts down equipment in correct sequence but fails to clear fuel/oxygen lines of all gas, does not clear regulators and back out regulator screws.	Proficient Student shuts down equipment in correct sequence but fails to clear fuel/oxygen lines of all gas.	Advanced Student correctly shuts down valves and clears all gauges and hoses of gas pressure. Equipment is then properly stored in shop.