iRubric: Welding Test rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...

Welding Test

Student will preform 3 types of welds that are found a vehicles.

Rubric Code: HXA4WC9

By autobodyIS

Ready to use

Public Rubric

Subject: Vocational

Type: Assessment

Grade Levels: 9-12

Welding test
	Poor 0 pts	Fair 5 pts	Good 10 pts
Safety	Poor Student did not wear any safety equipment	Fair Student did not wear all safety equipment. for either welding mask, long sleeves, gloves, long pants, and covered shoes	Good Student wore all safety equipment. welding mask, long sleeves, gloves, long pants, and covered shoes
Equipment sit up	Poor Student did not set up welder.	Fair Student forgot a few steps when setting up a welder	Good Student set up welder correctly
Setting welder	Poor Student did not set voltage or wire speed at all for thickness of metal	Fair Student was off on voltage or wire speed for thickness of metal	Good Student set voltage and wire speed correctly for metal thickness
Lap weld	Poor Student did not attempt a lap weld	Fair Student had a lot of over lap and or under cut on lap weld. Student could not run a continuous bead. didn't have good penetration.	Good Student had very little over lap and or under cunt on lap weld. student could run a continuous bead. good penetration on weld.
Butt weld	Poor Student did not attempt a putt weld	Fair Student had a lot of over lap and or under cut on butt weld. Student could not run a continuous bead. didn't have good penetration	Good Student had very little over lap and or under cunt on butt weld. student could run a continuous bead. good penetration on weld.
Plug weld	Poor Student did not attempt a plug weld	Fair Student had a lot of over lap and or under cut on plug weld. Student could not run a continuous bead. didn't have good penetration	Good Student had very little over lap and or under cunt on plug weld. student could run a continuous bead. good penetration on weld.
Putting name on work	Poor Student didn't put name on work	Fair	Good Student put name on work
Shutting down welder	Poor Student left welder on, gas on, and gun and ground out.	Fair Student shut down most of welder but forgot one thing like turning of welder, turning gas on, didn't roll up welding gun or ground	Good Student shut down welder all the way. Turned off welder and gas. Rolled up gun and ground wire
Clean up	Poor Student didn't clean up work area	Fair Student left either gloves, welding jacket, or pliers out.	Good Student cleaned up whole work area.
getting work graded	Poor left welding work on welding table instead of moving to grading table	Fair	Good Student moved welding work from welding table to grading table