iRubric: Welding Rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...

Welding Rubric

This rubric is used to assess beads and other assigned welds.

Rubric Code: GA8452

By rodback

Ready to use

Public Rubric

Subject: Vocational

Type: Assessment

Grade Levels: 9-12

Welding Rubric
	Needs Improvement 1 pts	Showing Progress 2 pts	Average 3 pts	Much Improved 4 pts	Excellent 5 pts	Student Score (N/A)
Width of Weld Build-up	Needs Improvement Weld was attempted but proper width and weld buildup is not present.	Showing Progress Erratic weld width throughout the weld.	Average Proper width and build-up on portions of the weld.	Much Improved Proper Width of weld in portions of the weld, but not consistent throughout the length of the weld. Build-up is not uniform throughout the weld	Excellent Width of Weld is uniform throughout the entire width of the bead Build-up of bead proper in relation to the thickness of metal.	Student Score
Appearance	Needs Improvement Weld was attempted	Showing Progress Portions of the weld were smooth and showing signs of a good weld. Inconsistent weld deposits make weld look undesirable.	Average Inconsistent weld deposits. Some signs of proper weld design and appearance.	Much Improved Much improved weld design and appearance. Much of the weld is smooth and aesthetically pleasing.	Excellent Excellent appearing weld. Smooth throughout the contour and length of the weld.	Student Score
Beginning/Ending of Weld	Needs Improvement Weld was started and ended.	Showing Progress Cold start to begin, but started to recover. Ending crater not filled and completely filled	Average Beginning almost completely filled and end crater beginning to show signs of completeness.	Much Improved Good beginning and ending but crater not quite filled completely. Some signs of cold lap at beginning.	Excellent Weld has excellent uniform beginning and uniform ending with ending crater filled completely.	Student Score
Safe Work Habits bonus points	Needs Improvement Careless and carefree attitude in the shop during the welding process. Safety glasses were not worn during the welding process or during the duration of class period.	Showing Progress Showed careless attitutude towards safety. Takes glasses off on occasion because they are found to be annoying.	Average Wears safety glasses but often takes them off during more safe type of activities in the shop.	Much Improved Wears safety glasses and operates equipment safely. Expresses concern over the real need to wear and use protective equipment.	Excellent Wears proper safety equipment and glasses at all times. Demonstrates positive attitude towards safety and understands the importance of safety in the workplace.	Student Score