iRubric: Drafting - Apartment rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...

Drafting - Apartment

Drafting 3D Cube

Assessment of technical drawing skills.

Rubric Code: FACAB3

By jgamage

Ready to use

Public Rubric

Subject: Engineering

Type: Assessment

Grade Levels: 6-8

3D Cube
	ME 10 pts	M 8.5 pts	MM 7.5 pts	NYM 5 pts
Border	ME The border is 1/2" on all sides.	M The border is 1/2" on all sides with a tolerance of 1/16th.	MM The border is 1/2" on 3 sides with a tolerance of 1/16th.	NYM Border is inaccurate on all sides.
Title Block	ME The title block is correctly spaced - 1/8, 1/4, 1/8, 1/4, 1/8 The title block is correctly divided - 3 1/2 and 7	M The title block is correctly spaced - 1/8, 1/4, 1/8, 1/4, 1/8 The title block is correctly divided - 3 1/2, 7 Tolerance of 1/16th	MM The title block is correctly spaced - 1/8, 1/4, 1/8, 1/4, 1/8 The title block is correctly divided - 3 1/2, 7 Tolerance of 1/16th No more that 3 errors.	NYM The title block is incorrectly spaced and divided.
Gothic Printing	ME All letters and numbers are written in Gothic font. All are in the same direction of the title block and evenly spaced. Ghost lines are properly used.	M All letters and numbers are written in Gothic font. All are in the same direction of the title block. Ghost lines are used. No more than 5 errors.	MM All letters and numbers are written in Gothic font. No more than 8 errors.	NYM More than 8 errors
Clean	ME Dots are barely visible. All stray and extra lines have been erased. Lines are drawn cleanly - one direction, single line.	M Dots are small. All stray and extra lines have been erased.	MM Dots are small. All stray and extra lines have been erased. No more than 5 errors.	NYM More than 5 errors.
Tool Use	ME All tools have been used correctly at all times.	M All tools have been used correctly with no more than 5 errors.	MM All tools have been used correctly with no more than 8 errors.	NYM Tools have not been used correctly.
Dimensions	ME All necessary walls are labeled with correct dimensions.	M All necessary walls are labeled with correct dimensions. No more than 3 errors.	MM Most walls are labeled with correct dimensions. No more than 6 errors.	NYM More than 6 errors in wall labeling and measurement.