Skip to main content
iRubric: VOCATIONAL SKILLS rubric

iRubric: VOCATIONAL SKILLS rubric

preview rubric

 

edit print email Copy to my rubrics Bookmark test run apply to... delete

VOCATIONAL SKILLS

  Derived from rubric: VOCATIONAL SKILLS
built by ryanp411

Rubric Code: XXACWAB
Grinding a general purpose tool bit
ready Ready to use    public Public Rubric

Directly link to this rubric or embed it on your website:
url:
link:
embed:
Keywords: (None)
Categories: Subjects: Vocational  
Types: Assignment   (Other)  
Grade Levels:

Powered by iRubric Vocational Grading Criteria
TOOL BIT GRINDING

timed project 5 minutes
  Excellent 4
(N/A) Meets all tolerances. completed under the time limit
Good 3
(N/A) +/- 3 degrees out of tolerance. completed on time
Fair 2
(N/A) +/- 6 degrees out of tolerance. completed on time
Poor 1
(N/A) +/- 6 degrees out of tolerance. completed on time
Grade Received
(N/A)
Comment
(N/A)
Front cutting edge angle
Excellent 4

The job was 100% complete and worked according to the task description. the angles are same length, the right angle is applied,
Meets all tolerances. completed under the time limit
Good 3

The job was complete and worked, but needed minor modifications. +/- 3 degrees out of tolerance. completed on time
Fair 2

The job was complete but did not work; needed several minor modifications. Required some supervision. the degrees were off. +/- 6 degrees out of tolerance. completed on time
Poor 1

The job was complete but did not work; needed several major modifications. Needed constant supervision. +/- 10 degrees or more out of tolerance. did not complete on time, and need more time
Grade Received


Comment


Nose clearance angle
Excellent 4

The job was 100% complete and worked according to the task description. meet in the center of the part evenly Meets all tolerances. completed under the time limit
Good 3

The job was complete and worked, but needed minor modifications.+/- 3 degrees out of tolerance. completed on time
Fair 2

The job was complete but did not work; needed several minor modifications. Required some supervision +/- 6 degrees out of tolerance. completed on time
Poor 1

The job was complete but did not work; needed several major modifications. Needed constant supervision. +/- 10 degrees out of tolerance. not completed on time
Grade Received


Comment


Side clearance angle
Excellent 4

The job was 100% complete and worked according to the task description. side clearance angle is at the right degree completed under the time limit
Good 3

The job was complete and worked, but needed minor modifications. +/- 3 degrees out of tolerance. completed on time
Fair 2

The job was complete but did not work; needed several minor modifications. Required some supervision +/- 6 degrees out of tolerance. completed on time
Poor 1

The job was complete but did not work; needed several major modifications. Needed constant supervision. +/- 10 degrees out of tolerance. not completed on time
Grade Received


Comment


Side rake angle
Excellent 4

Student was able to complete the task without assistance. side rake angle is at the right degree completed under the time limit
Good 3

Student was able to complete the task with little assistance. +/- 3 degrees out of tolerance. completed on time
Fair 2

Student was able to complete the task with moderate assistance. +/- 6 degrees out of tolerance. completed on time
Poor 1

Student was unable to complete task without major assistance. +/- 10 degrees out of tolerance. not completed on time
Grade Received


Comment


Back rake angle
Excellent 4

Student had/gathered all materials and was completely ready to go to work. the back rake angle completed under the time limit
Good 3

Student had/gathered most materials and went to work. +/- 3 degrees out of tolerance. completed on time
Fair 2

Student had/gathered most materials, however, they needed excess time to do so. +/- 6 degrees out of tolerance. completed on time
Poor 1

Student did not have/gather some of the needed materials to perform work. +/- 10 degrees out of tolerance. not completed on time
Grade Received


Comment


Overall Finish of Part
Excellent 4

Routinely used time well throughout the project to get the job done on under the time limit.
Good 3

Used time fairly well throughout the project.+/- 3 degrees out of tolerance. completed on time
Fair 2

Procrastinated somewhat but did get the job done on time. +/- 6 degrees out of tolerance. completed on time
Poor 1

Was unable to adequately meet timeline due to inablility. +/- 10 degrees out of tolerance. not completed on time
Grade Received


Comment


Application of Safety Practices
Excellent 4

Student followed all safety rules. cleaned up area, removed grindings, and put up tools
Good 3

Student followed most safety rules, may have forgotten one. cleaned up area, removed grindings, and put up tools
Fair 2

Student attempted to follow safety rules but failed to meet several. did not complete cleaned up area, removed grindings, and put up tools
Poor 1

Student failed to follow a significant number of safety rules. did not do any of cleaning procedures
Grade Received


Comment


Project Completition
Excellent 4

Student completed project, under time limit, all angles are right, and turned it end
Good 3

Student completed project, under time limit, all angles are right, after fixing the minor projects and turned it end
Fair 2

Student completed project, on time limit, all angles are right, after fixing the major projects and turned it end
Poor 1

Student completed project, under time limit, all angles are right, after fixing the minor projects and turned it end
Grade Received


Comment





Discuss this rubric



Do more with this rubric:

Preview

Preview this rubric.

Edit

Modify this rubric.

Copy

Make a copy of this rubric and begin editing the copy.


Print

Show a printable version of this rubric.

Categorize

Add this rubric to multiple categories.

Bookmark

Bookmark this rubric for future reference.
Assess

Test run

Test this rubric or perform an ad-hoc assessment.

Grade

Build a gradebook to assess students.

Collaborate

Apply this rubric to any object and invite others to assess.
Share

Publish

Link, embed, and showcase your rubrics on your website.

Email

Email this rubric to a friend.

Discuss

Discuss this rubric with other members.
 

Do more with rubrics than ever imagined possible.

Only with iRubrictm.


Bookmark this page:   RCampus RCampus   twit this twitter   delicious del.icio.us   digg Digg   facebook Facebook  
Copyright © 2018 Reazon Systems, Inc.  All rights reserved.