Skip to main content
iRubric: VOCATIONAL SKILLS rubric

iRubric: VOCATIONAL SKILLS rubric

find rubric

edit   print   share   Copy to my rubrics   Bookmark   test run   assess...   delete   Do more...
VOCATIONAL SKILLS 
VOCATIONAL SKILLS
Grinding a general purpose tool bit
Rubric Code: XXACWAB
By ryanp411
Ready to use
Public Rubric
Subject: Vocational  
Type: Assignment  
Grade Levels: (none)

Powered by iRubric Vocational Grading Criteria
TOOL BIT GRINDING

timed project 5 minutes
  Excellent 4

Meets all tolerances. completed under the time limit

(N/A)

Good 3

+/- 3 degrees out of tolerance. completed on time

(N/A)

Fair 2

+/- 6 degrees out of tolerance. completed on time

(N/A)

Poor 1

+/- 6 degrees out of tolerance. completed on time

(N/A)

Grade Received

(N/A)

Comment

(N/A)

Front cutting edge angle

Excellent 4

The job was 100% complete and worked according to the task description. the angles are same length, the right angle is applied,
Meets all tolerances. completed under the time limit
Good 3

The job was complete and worked, but needed minor modifications. +/- 3 degrees out of tolerance. completed on time
Fair 2

The job was complete but did not work; needed several minor modifications. Required some supervision. the degrees were off. +/- 6 degrees out of tolerance. completed on time
Poor 1

The job was complete but did not work; needed several major modifications. Needed constant supervision. +/- 10 degrees or more out of tolerance. did not complete on time, and need more time
Grade Received
Comment
Nose clearance angle

Excellent 4

The job was 100% complete and worked according to the task description. meet in the center of the part evenly Meets all tolerances. completed under the time limit
Good 3

The job was complete and worked, but needed minor modifications.+/- 3 degrees out of tolerance. completed on time
Fair 2

The job was complete but did not work; needed several minor modifications. Required some supervision +/- 6 degrees out of tolerance. completed on time
Poor 1

The job was complete but did not work; needed several major modifications. Needed constant supervision. +/- 10 degrees out of tolerance. not completed on time
Grade Received
Comment
Side clearance angle

Excellent 4

The job was 100% complete and worked according to the task description. side clearance angle is at the right degree completed under the time limit
Good 3

The job was complete and worked, but needed minor modifications. +/- 3 degrees out of tolerance. completed on time
Fair 2

The job was complete but did not work; needed several minor modifications. Required some supervision +/- 6 degrees out of tolerance. completed on time
Poor 1

The job was complete but did not work; needed several major modifications. Needed constant supervision. +/- 10 degrees out of tolerance. not completed on time
Grade Received
Comment
Side rake angle

Excellent 4

Student was able to complete the task without assistance. side rake angle is at the right degree completed under the time limit
Good 3

Student was able to complete the task with little assistance. +/- 3 degrees out of tolerance. completed on time
Fair 2

Student was able to complete the task with moderate assistance. +/- 6 degrees out of tolerance. completed on time
Poor 1

Student was unable to complete task without major assistance. +/- 10 degrees out of tolerance. not completed on time
Grade Received
Comment
Back rake angle

Excellent 4

Student had/gathered all materials and was completely ready to go to work. the back rake angle completed under the time limit
Good 3

Student had/gathered most materials and went to work. +/- 3 degrees out of tolerance. completed on time
Fair 2

Student had/gathered most materials, however, they needed excess time to do so. +/- 6 degrees out of tolerance. completed on time
Poor 1

Student did not have/gather some of the needed materials to perform work. +/- 10 degrees out of tolerance. not completed on time
Grade Received
Comment
Overall Finish of Part

Excellent 4

Routinely used time well throughout the project to get the job done on under the time limit.
Good 3

Used time fairly well throughout the project.+/- 3 degrees out of tolerance. completed on time
Fair 2

Procrastinated somewhat but did get the job done on time. +/- 6 degrees out of tolerance. completed on time
Poor 1

Was unable to adequately meet timeline due to inablility. +/- 10 degrees out of tolerance. not completed on time
Grade Received
Comment
Application of Safety Practices

Excellent 4

Student followed all safety rules. cleaned up area, removed grindings, and put up tools
Good 3

Student followed most safety rules, may have forgotten one. cleaned up area, removed grindings, and put up tools
Fair 2

Student attempted to follow safety rules but failed to meet several. did not complete cleaned up area, removed grindings, and put up tools
Poor 1

Student failed to follow a significant number of safety rules. did not do any of cleaning procedures
Grade Received
Comment
Project Completition

Excellent 4

Student completed project, under time limit, all angles are right, and turned it end
Good 3

Student completed project, under time limit, all angles are right, after fixing the minor projects and turned it end
Fair 2

Student completed project, on time limit, all angles are right, after fixing the major projects and turned it end
Poor 1

Student completed project, under time limit, all angles are right, after fixing the minor projects and turned it end
Grade Received
Comment




Subjects:


Discuss this rubric




Do more with this rubric:
Preview

Preview

Preview this rubric.
Edit

Edit

Modify this rubric.
Copy

Copy

Make a copy of this rubric and begin editing the copy.

Print

Print

Show a printable version of this rubric.
Categorize

Categorize

Add this rubric to multiple categories.
Bookmark

Bookmark

Bookmark this rubric for future reference.
Assess
Test run

Test run

Test this rubric or perform an ad-hoc assessment.
Grade

Grade

Build a gradebook to assess students.
Collaborate

Collaborate

Apply this rubric to any object and invite others to assess.
Share
Publish

Publish

Link, embed, and showcase your rubrics on your website.
Email

Email

Email this rubric to a friend.
Discuss

Discuss

Discuss this rubric with other members.
 

Do more with rubrics than ever imagined possible.

Only with iRubrictm.


Copyright © 2024 Reazon Systems, Inc.  All rights reserved.
n98