- Username
- Password
forgot?

iRubric: Hand Tool Exercise rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...
Hand Tool Exercise Hand Tool Exercise The hand tool exercise is used to develop skills in using layout tools such as the compass,tape measure,t-bevel ,speed square and combination square.Hand tools such as a hammer,nail set ,block plane ,chisel and a hand saw.It also incorporates some power tools such as ,circular saw,portable drills.Had to determine the proper size nails and drill bits. Rubric Code: WX93B76 By BuildingTrades Ready to use Public Rubric Subject: Vocational Type: Assessment Grade Levels: 9-12

Chisel Performance Task
	Poor 1 pts	Fair 2 pts	Good 3 pts
Safety Equipment/Materials/Tools	Poor Did not collect all safety equipment, materials, and tools needed for task.	Fair Collected some of the safety equipment, materials, and tools needed for task.	Good Collected all safety equipment, materials, and tools needed for task.
Layout/Markings For Hinge	Poor Was unable to layout and mark hinge area to be notched out.	Fair Was able to partially layout and mark hinge area to be notched out.	Good Was able to completely layout and mark hinge area to be notched out.
Cut Lines In Wood Using Chisel	Poor Did not follow markings made when chiseling the perimeter and inside lines to be notched.	Fair Partially followed markings made when chiseling the perimeter and inside lines to be notched.	Good Completely followed markings made when chiseling the perimeter and inside lines to be notched.
Notch Area In Wood Using Chisel	Poor Did not notch out the recessed area using a chisel.	Fair Partially notched out the recessed area using a chisel.	Good Completely notched out the recessed area using a chisel.
Used Awl and Drill For Pilot Holes	Poor Did not use the awl to make a center indent for pilot holes and did not use the drill to complete the pilot holes.	Fair Did not use the awl to make a center indent for pilot holes but did use the drill to make the pilot holes.	Good Did use the awl to make a center indent for pilot holes and used the drill to complete the pilot holes.
Installation of Butt Hinge	Poor Screws were installed at an angle, and not flush with the surface of the hinge.	Fair Screws were installed straight but were not flush with the surface of the hinge.	Good Screws were installed straight and were flush with the surface of the hinge.
Clean Up	Poor Did not return tools and equipment to proper storage place and did not dispose of material scraps properly.	Fair Partially returned tools and equipment to proper storage place and partially disposed of material scraps properly.	Good Returned tools and equipment to proper storage place and disposed of material scraps properly.