Project areas will be checked or graded using the features of the program.
(N/A)
Shows 3 X 3 box when activated
Reference point for the center of the triangle
10" diameter circle
Shows box and 10 sided entity on 10" diameter circle
The triangle on the 3 X 3 box
1 pts
* 3X3XZ+3, and the top RH corner placed on: X-3.5, Y-3.5, Z0 (4) * .25 radii all 4 corners (2)
* 1.75 or 1.7321" base. (2) * 1.5" riser(2) *Z+ 1.0" off of top of box and center of triangle on point (2)
*6" diameter circle (2) * Center on x20", y20" (2) * Z -10" (2)
*1X1XZ+1" off top of box (2) * .125" corner radii on 4 corners (2) * Box center on center of circle (2)
* 20 " circle circumscribed construction w/ .125 radii all corners (2) * Centered on circle bottom (2) *Cut into bottom Z-10" (2)
* Located on center top of 6" diameter circle (2) Named "G54 circle" (2) Placed on entity so when viewed RH rule applies (2)
*Located on bottom of 10" diameter circle (2) * Named "G54 circle - Bottom" (2) * Placed on entity so when viewed RH rule applies (2)