Skip to main content
iRubric: Pencil Skirt rubric

iRubric: Pencil Skirt rubric

find rubric

edit   print   share   Copy to my rubrics   Bookmark   test run   assess...   delete   Do more...
skirt evaluation
Rubric Code: QX7AXW8
Ready to use
Public Rubric
Subject: Vocational  
Type: Project  
Grade Levels: 9-12

Powered by iRubric Look Fors
 

- Skill developing

1 pts


- skill executed at an intermediate level

2 pts


- skill executed at an advanced level

3 pts

Backstitching

1

Student did not backstitch on their project.
2

Student backstitched most of the time on their project.
3

Student backstitched all the time on their project.
Cutting out pattern

1

Cutting was not very straight nor even, and may cause difficulty in matching and sewing even seams.
2

Cutting was close to accurate, with one or two minor deviations.<BR>
Notches were cut out properly.
3

Cutting was accurate. Notches were cut out properly.
Pattern Reading

1

Student makes little attempt at read guide sheet but does not understand directions
2

Student reads guide sheet and understands what is written. Student is able to perform most sewing tasks with out additional help.
3

Student reads guide sheet and understands what is written. Student is able to perform all sewing tasks from the guide sheet independently.
Seams- matching

1

At least 50% of the seams are correct. Edges are matched. Notches are matched. <BR>
Sewing is straight.
2

at least 90% of all seams are correctly sewn, straight and 5/8" wide.
3

All seams are 5/8" width and sewn straight and correctly matched.<BR>
Seams were pinned properly before sewing.
Seams

1

Seams have many puckers and/or are stretched. The seams are wider than what the instructions called for. Student did not keep right sides together.
2

Seams are a little wider than what the instructions called for. Seams may have 1 pucker but are not stretched. Seams are otherwise sewn straight.
3

Seams are the correct width that the instructions called for. They are not puckered or stretched. Project has right sides together throughout the project.
Closure- zipper

1

50% of sewing is accurate. Most of sewing is incorrect and zipper does not close properly. Stitching is crooked and steps were not followed correctly.
2

100% of steps are done correctly but stitching is not neat. Zipper is not centered over seam line. Raw edges are still showing is spots. Most of the basting stitches were removed.
3

All steps have been done correctly . Stitching is straight and matched on both sides. Raw edges at top are hidden in seam allowance.<BR>
Basting stitches have been removed.
Interfacing

1

Interfacing was used but was not applied properly.
2

Interfacing was correct weight and was applied accurately with a good appearance.
3

Interfacing was correct weight and was applied accurately with an expert appearance.
Darts

1

Darts are crooked, puckered, or bumpy. They are not correctly pressed.
2

Darts help fit the garment but are not professionally constructed.
3

Darts are correctly positioned, smooth, well pressed, and stitched correctly.
Waistband

1

Problems were encountered with the constructing of a waistband, causing an awkward but workable product. Hook and eye attachments are not up to standards.
2

Steps to constructing the waistband were followed, with minor finish or appearance problems. Some raw edges may be exposed. Hook and eye are securely attached with slight problems.
3

Steps to constructing the waistband were followed, and resulted in an expert appearance. All raw edges are properly enclosed. Hook and eye are properly positioned, securely stitched, and invisible on the outside.
Lining

1

Lining is present but is bulky, poorly finished, or too long.
2

Lining is installed with minor fit or finish problems.
3

Lining is installed, fits properly, and is not visible from the outside of the garment.
Hem

1

Hem is not sewn with a blind-stitch correctly.<BR>
If machine made hem, stitching is uneven and sloppy.<BR>
Hemline is uneven.
2

90% of hem is straight and sewn correctly. There are minor mistakes. hand blind-stitches are not spaced evenly.
3

Hem is correctly sewn with evenly spaced blind-stitching. stitches do not show on the outside. Hem is even and no raw edges are showing.
Fit

1

Fit was not adjusted to complement the individual shape of the student.
2

Student attempted to adjust the fit of the garment with mixed results.
3

The fit of the skirt was customized for the student and fits the student well.
Pressing

1

Rarely pressed seams and stitching, during construction. Lack of correct pressing caused a limited degree of effectiveness.
2

Pressed all seams flat open, darts as directed and stitching, after each step during construction, smoothly and accurately, most of the time.
3

Pressed all seams flat open, darts as directed, and stitching, after each step during construction, smoothly and accurately. Used proper techniques, press cloth as needed.
Appearance

1

Project does not look like it is suppose to. 3 or more parts are mishapen.
2

One part has mistakes.
3

Garment has professional appearance
Time Management

1

The student did not finish project in the time allotted. Student had to be redirected to work during class.
2

Student needed extra time to finish project.
3

Project was turned in on time or early.



Keywords:
  • sewing project

Subjects:

Types:





Do more with this rubric:

Preview

Preview this rubric.

Edit

Modify this rubric.

Copy

Make a copy of this rubric and begin editing the copy.


Print

Show a printable version of this rubric.

Categorize

Add this rubric to multiple categories.

Bookmark

Bookmark this rubric for future reference.
Assess

Test run

Test this rubric or perform an ad-hoc assessment.

Grade

Build a gradebook to assess students.

Collaborate

Apply this rubric to any object and invite others to assess.
Share

Publish

Link, embed, and showcase your rubrics on your website.

Email

Email this rubric to a friend.

Discuss

Discuss this rubric with other members.
 

Do more with rubrics than ever imagined possible.

Only with iRubrictm.



Copyright © 2024 Reazon Systems, Inc.  All rights reserved.
n16