iRubric: Oxy-Fuel Torch Set-up rubric

(draft) edit print share Copy to my rubrics Bookmark test run assess... delete Do more...
Oxy-Fuel Torch Set-up Oxy-Fuel Torch Set-up Rubric Code: K562CC By southobrien Draft Public Rubric Subject: Vocational Type: Presentation Grade Levels: 9-12

Oxy-Fuel Set-Up
	Poor 1 pts	Fair 2 pts	Good 3 pts
Personal Safety Equipment	Poor Student does not use required personal safety equipment when preparing to set oxy-fuel equipment.	Fair Student uses most personal safety equipment but is missing safety glasses or is not wearing appropriate welding/cutting gloves, jacket, or cutting goggles/faceshield.	Good Student wears correctly all required safety equipment for this exercise.
Torch Set-Up	Poor Student does not check cutting equipment to insure hoses/ torches and torch valves are in correct positions. Students incorrectly open valves on cylinders or incorrectly sets pressures on operating gauges. Student does not light torch correctly or cannot properly adjust to a nuetral flame.	Fair Student checks cutting equipment but misses a step or adjusts valves/gauges incorrectly. Student lights torch correctly but cannot adjust to a neutral flame.	Good Student correctly checks equipment and insures valves and gauges are adjusted properly. Student lights torch and adjusts for neutral flame properly.
Torch Shut-Down	Poor Student incorrectly shuts down cutting equipment out of sequence or leaves a valve open.	Fair Student shuts down equipment in correct sequence but fails to clear fuel/oxygen lines of all gas.	Good Student correctly shuts down valves and clears all gauges and hoses of gas pressure. Equipment is then properly stored in shop.