- Username
- Password
forgot?

iRubric: Wall Framing - Basic rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...
Wall Framing - Basic Wall Framing - Basic Wall Framing - Basic. Students will be able to frame a wood built wall according to plans. Keywords: PPE, dimension, discrepancy, flush, alignment, shiner, stud, plate, component. Rubric Code: DX35A5W By kalebpayton Ready to use Public Rubric Subject: Vocational Type: Project Grade Levels: 9-12

Wall Framing
	Falls Far Below 0 pts	Approaches 2 pts	Meets 3 pts	Exceeds 4 pts
Safety & Tool Use	Falls Far Below Safety glasses and other PPE come off even once during project. Work area is cluttered and tools are not used properly or put back properly.	Approaches All necessary PPE is worn at all times. Work area is kept free of major obstacles, but scraps and unneeded tools are left out. Tools are used improperly more than once.	Meets All necessary PPE is worn at all times. Work area is usually kept clutter free; scraps and unneeded tools are put away fairly quickly. Tools are always used properly and placed in their proper area.	Exceeds All necessary PPE is worn at all times. Work area is kept clutter free; scraps and unneeded tools are put away immediately. Tools are always used properly and placed in their proper area.
Squareness of Frame	Falls Far Below A discrepancy of more than 1/2" exists between diagonals	Approaches A discrepancy of 1/2" or less exists between diagonals	Meets A discrepancy of 1/4" or less exists between diagonals.	Exceeds A discrepancy of 1/8" or less exists between diagonals.
Dimensions	Falls Far Below One or more of the dimensions is off by MORE THAN 1/2"	Approaches One or more of the dimensions is off by 1/2" or less	Meets One or more of the dimensions is off by 1/4" or less	Exceeds All dimensions of the frame are 1/8" or less
Structure and Appearance	Falls Far Below Excess shiners, gaps, damage, lack of alignment	Approaches More than four components are out of flush.	Meets No more than two components are out of flush.	Exceeds All components are flush. There are no gaps between studs and plates larger than 1/8".
Components	Falls Far Below Any of the component requirements are not evident or are out of position by 1/2" or more.	Approaches Studs are placed within 1/2" of specified spacing.	Meets Studs are placed within 1/4" of specified spacing.	Exceeds Studs are placed within 1/8" of specified spacing.